19
Control Head Keys
The available keys are determined by your control head model.
Your control head might not include all the keys shown in this
section.
ZOOM I
N
(+)/ZOOM O
UT
(–)
KEYS
Press the ZOOM keys to change the scale of the view.
For a closer view,
press the ZOOM IN (+) key.
For a
wider view
, press the ZOOM OUT (-) key. You can also
magnify the cursor selection. You can also press
these keys to adjust the sensitivity in sonar views
(Sonar, DI, SI).
VIEW
KEY
Press and hold the VIEW key to open the Views
X-Press menu, or press the VIEW key repeatedly until
the view you want to use is displayed on the screen.
Press the EXIT key to display the previous view. See
Views
for details.
CHECK/INFO
KEY
In the Chart View, press the CHECK/INFO key to see
information about the cursor position or about
objects located near the cursor position. If the cursor
is not active, the Chart Info submenu will open. See
Navigation Overview
for details.
In Sonar Views, press this key once to switch
frequencies (if available). See each sonar section for
details.
C
URSOR
C
ONTROL KEY
(LEFT, RIGHT, UP, or DOWN Cursor keys)
Press the arrows on the Cursor Control key
to move through the menu system, select
menus, and change or activate menu
settings. See
Menu System Overview
for
details.
Also, press any arrow on the Cursor Control
key to move the cursor on the view.
To move the cursor diagonally, press in
between the arrows.
MARK
KEY
Press the MARK key to save a waypoint at the boat
position. If the cursor is active, press the MARK key
twice to save a waypoint at the cursor position. See
Navigation Overview
for details.
If a microSD card is installed, press and hold this key
to save a Screen Snapshot. See
Manage Screen
Snapshots and Recordings
for details.
MENU
KEY
To open the X-Press Menu for the on-screen view and
operation mode, press the MENU key once. To open
the Main Menu, press the MENU key twice. See
Menu
System Overview
for details.
GO TO/M
AN
O
VERBOARD
(MOB)
KEY
With an active cursor, press the GOTO key twice to
create a waypoint and start navigation towards that
waypoint. If the cursor is not active, press the GOTO
key, and choose from the saved navigation data.
To start Man Overboard navigation, press and hold the
GOTO key. See
Navigation Overview
and
Man
Overboard (MOB) Navigation
for details.
EXIT
KEY
Press the EXIT key to close a menu, close a dialog box,
turn off an alarm, or exit Cursor mode.
Also, press the EXIT key to scroll through the View
Rotation in reverse order. See
Views
for details.
POWER
KEY
Press the POWER key to power on the control head.
To power off, press and hold the POWER key.
During operation, press the POWER key. The backlight
can be adjusted from this menu. You can also turn
on/off Sonar, change the view background color, and
start Standby mode.
The Control Head
