193
Manage your Control Head
Apply an Offset to a Digital Readout
Use the following instructions to adjust the digital readout by the offset amount entered.
1.
Main Menu (Advanced User Mode):
Press the MENU key twice. Select the
Setup
tab.
2. Select one of the following menus. Use the RIGHT or LEFT Cursor keys to adjust the offset.
Change the Latitude/Longitude Format
1.
Main Menu (Advanced User Mode):
Press the MENU key twice. Select the
Setup
tab.
2. Select Position Format.
3. Press the RIGHT or LEFT Cursor keys to select a format.
Change the Time and Date Format
1.
Main Menu (Advanced User Mode):
Press the MENU key twice. Select the
Setup
tab.
2. Select one of the following menus. Press the RIGHT or LEFT Cursor keys to select a format.
Turn off Demonstration Mode
The control head will start demonstration mode if a start up mode is not selected when the unit is first turned on (see
Getting
Started
). If the screen is displaying tips, menus, and views automatically, it is in Demonstration mode. Use the following instructions
to turn off Demonstration mode.
NOTE:
Menu settings cannot be saved in Demonstration mode.
1.
Main Menu:
Press the MENU key twice. Select the
Setup
tab.
2. Select Demonstration.
3. Select Off.
Depth Offset
Adjusts the depth digital readout by the amount entered. To read the depth from the waterline,
enter a positive vertical measurement. To read the depth from the keel, enter a negative
amount.
Temp. Offset
Adjusts the temperature digital readout by the amount entered.
Speed Calibration
Adjust the speed digital readout by the amount entered. Speed paddlewheel accessory required.
Local Time Zone
Select your time zone.
Daylight Saving
Time
To add one hour to the time displayed in the local time zone, select On.
Time Format
Select a time format. International models only.
Date Format
Select a date format. International models only.
