Configuration manual EGS(H)41
14
The reason why the switch symbol is highlighted red is because the switch is either defective or not
connected correctly. The number of hours [h] in operation and the PCB temperature of the connected
device is displayed below the switch symbol.
When a switch is inactive it appears dimmed.
Text highlighted red indicates that a device fault has occurred (see Chapter 10).
3.4
Establishing a connection and logging on
Click the button 'Establish connection' to establish communications between the configuration software
and the EGS(H)41 device.
The rotating communications status indicator is displayed.
Data relating to device identification such as user designation, article code and the serial number are
read out of the device and displayed in the information area.
The device status on the right-hand side of the information area changes to 'connected'.
Device data in the information section is refreshed approx. once per second.
You have now accessed the lowest user level. In this level you are able to view the settings of the
connected EGS(H)41. On the 'Monitoring' screen you are able to observe the positions of the switches
analogous to an oscilloscope. Further details are available in Chapter 6.
Password authentication is required to be able to make changes to the configuration!
To enter your password for authentication click the menu item 'Device settings\Parameters'.
Enter your password in the Enter password box and click OK to confirm.
PLEASE NOTE!
The login password is set ex-works to 'huebner'.
CAUTION!
Change the password as soon as possible to protect the configuration from unauthorized
access!
(Please refer to Chapter 5 'Parameter 2 page').
Once you have successfully logged in three new pages are displayed on-screen for selection:
Operating data
Parameters 1
Parameters 2
