Configuration manual EGS(H)41
5
This document tells you how to adjust the program settings for EGS(H) 41 with the EGS41Pro soft-
ware and transfer them to the device.
PLEASE NOTE!
The documentation and the dimensional drawings will be copied in the installation folder
in PDF format by the installation.
1
Setting up
Allow sufficient time to plan the integration and configuration of the EGS(H) 41. Please remember that
planning and configuration errors can put people at risk. Put organizational measures in place to guar-
antee safety during configuration procedures!
Ensure that the system cannot enter any dangerous states during the configuration procedures includ-
ing in that part of the system monitored by devices connected to the EGS(H) 41.
To configure the EGS(H) 41 you require the following:
Operating instructions belonging to the EGS(H) 41
Notebook/PC running a Windows
®
operating system
The configuration software EGS41Pro
A EGS(H) 41 device ready for operations
Connecting cable to connect the notebook/PC with the EGS(H) 41 device
1.1
Planning and configuration
Caution!
Ensure you have planned the application thoroughly before you begin to configure the
EGS(H)41!
Amongst other considerations the planning must include:
A detailed safety analysis of the planned application
A complete list of all required devices, their connections as well as the signals provided or re-
quired by these devices.
In addition, the following conditions must be fulfilled:
The EGS(H) 41 must be connected to the power supply.
The safety components must be electrically connected to the EGS(H) 41.
Read also the appropriate operating and assembly instructions.
1.2
System requirements
For configuration purposes it is possible to use any commercially available Windows
®
notebooks/PCs
that fulfil the following system requirements:
- Windows
®
XP SP3 / Vista / 7/8/8.1/10
- CD-ROM drive
- Available USB port
