Configuration manual EGS(H)41
28
11
Notes on configuration
It is only possible to configure the device with a single password (user rights: administrator). The facto-
ry-set administrator password is: huebner. For reasons of safety it is strongly advised that you create a
user-defined password (max. 12 characters). Information on how to change the password is available
on page Parameter2.
11.1
Switch delay
Activating switch delay leads to increased switch-off speeds when speeds are accelerating in the
switching point. Before activating the switch delay ensure the switch-off speed cannot reach danger-
ously high speeds.
(Note also the determination of the switching error which is described in the operating and assembly
instructions electronic overspeed switch EGS
®
41 EGS
®
(H)41 basic units).
11.2
Delayed overcurrent switch-off
Delayed overcurrent switch-off affects the functioning of the electronic fuse and can lead to the de-
struction of the switch when very high currents flow.
It is recommended that you install an external back-up fuse.
11.3
Slip angle detection
The switch remains open if the switch-off speed is reached within the set slip angle.
11.4
Diagnostics output
The diagnostics output is not a safety output.
CAUTION!
The electrical data of the diagnostics output vary (0...30V DC/max. 50 mA).
