Configuration manual EGS(H)41
20
PLEASE NOTE
The password on delivery of EGS(H) 41 is “huebner”.
Please note that you must enter a new password to protect the configuration from unau-
thorized changes!
When the factory-set password is changed the padlock symbol at the top of the screen is
displayed
closed.
To save changes permanently to the device click the 'Save data to device' button.
If an assigned user password has been lost, see chapter 9.1
5.4
Delete errors
It is possible to delete displayed error messages in the safety settings section. This also resets the
connected device.
If the cause of the error has not been rectified the internal diagnostics displays the error message
again after the connected device is reset.
Load factory settings:
All settings made in the device are returned to the original factory settings.
CAUTION!
Loading the factory defaults irrevocably overwrites all configuration settings, including the
safety settings!
5.5
Switching contact test
You can test the function of the switching outputs in the connected device in the bottom section.
Set the corresponding outputs directly using the buttons allocated to switching outputs S1, S2 and the
diagnosis output Diag.
Press “Reset test” to deactivate the test settings.
You can only carry out the test functions when the device is at a standstill!
