Configuration manual EGS(H)41
6
1.3
Installing the software
Ensure the EGS(H) 41 device and your notebook/PC are connected via the USB cable.
Close the automatically started „Found new hardware wizard“ with a click on “Cancel“.
Place the supplied CD containing the software into the CD drive or, alternatively, download the Set-
up.exe. If the Setup.exe does not run automatically, navigate via Explorer on the CD-ROM drive and
there start the Setup.exe.
1.
The Setup guides you through the installation. Please follow the instructions on the monitor.
If you use Windows XP or Vista, continue with step 2, users higher operating system versions
go on to step 3.
2.
Windows XP SP3/ Vista
Due to the ended support for your operating system, it is no longer possible for us to sign the
driver, therefore you need to confirm the installation manually. To do this, in Windows XP,
click on “ Continue Anyway ”. In Windows Vista click on “ Install this driver software anyway ”.
After that, the setup routine will continue.
3.
Completion
The software has been installed and starts automatically.
