Huber MPC Minichiller 280, Manual

Page: 54 / 60

Service/maintenance
OPERATION MANUAL Chapter 7
Minichiller®
V2.4.0en/09.08.21//1.30
54
Expect the formation of drops at the mechanical seal when operating with thermal fluids that evap-
orate only very slowly, as mechanical seals are never absolutely tight. These drops must be removed
if necessary. → Page 47, section »Function check and visual inspection« . The tightness of the me-
chanical seal must be visually checked. In case of a leakage, more thermal fluid escapes at the bot-
tom of the temperature control unit. Observe the proper disposal of thermal fluid. → Page 15, sec-
tion
»Proper disposal of resources and consumables«
.
7.6 Plug contacts
Exposed plug contacts
DAMAGE CAUSED BY FLUID INGRESS

Protect unused plug contacts with the protective caps supplied.

Clean surfaces only with a damp cloth.
Protective caps are supplied for all plug contacts. Make sure that any plug contacts not required are
protective with the caps.
7.7 Decontamination/repairs
Returning a not decontaminated temperature control unit for repair
PHYSICAL INJURY AND PROPERTY DAMAGE CAUSED BY HAZARDOUS MATERIALS IN OR ON THE
TEMPERATURE CONTROL UNIT

Carry out appropriate decontamination.

The decontamination process depends on the type and quantity of the materials used.

Consult the relevant safety data sheet.

You will find a prepared return receipt at www.huber-online.com.
As the responsible body you are responsible for carrying out decontamination before third-party
personnel come into contact with the temperature control unit / accessory. Decontamination must
be carried out before the temperature control unit / accessory is returned for repair or inspection.
Attach a clearly visible written notice stating that the temperature control unit / accessory has been
decontaminated.
To simplify the process, we have prepared a form for you. This is available for download at
www.huber-online.com.