Huber MPC Minichiller 280, Manual

Page: 20 / 60

Introduction
OPERATION MANUAL Chapter 1
Minichiller®
V2.4.0en/09.08.21//1.30
20
Auto start function switched on
The temperature control unit is set to the same state it was in before the power outage. For exam-
ple, before the power outage: Temperature control is off; after power outage: Temperature control
is off. If temperature control was active during a power outage, the process will automatically con-
tinue after the power outage.
→ Page 36, section »Changing the Auto-Start function« .
1.6 Exemplary illustrations of the cooling variants
Example: Air and
water cooling
Air cooling: Air inlet
Water cooling: Water
connection