Huber MPC Minichiller 280, Manual

Page: 43 / 60

Setup mode
Chapter 4 OPERATION MANUAL
V2.4.0en/09.08.21//1.30
Minichiller®
43
4.2.2.2 Draining with >Level indicator and drain< [38]
PROCEDURE

Have a suitable container ready to catch the thermal fluid.

Pull the hose from the >Level indicator and drain< [38]. As soon as you have pulled out the hose,
the thermal fluid will flow from the external application over the temperature control unit and
into the container. Check if the thermal fluid can be reused. Follow the instructions for the prop-
er disposal. → Page 15, section »Proper disposal of resources and consumables« .

Wait until the external application and the temperature control unit are empty.

Open the connection >Circulation flow< [1].

Open the connection >Circulation return< [2].

Leave the temperature control unit open for a while to allow it to dry out and the residue to
drain.

Close the connection >Circulation flow< [1].

Close the connection >Circulation return< [2].

Reinsert the hose into the >Level indicator and drain< [38].
The temperature control unit is now drained.