Huber MPC Minichiller 280, Manual

Page: 23 / 60

Commissioning
Chapter 2 OPERATION MANUAL
V2.4.0en/09.08.21//1.30
Minichiller®
23
▪ Do not lift and transport the temperature control unit at the lifting eyes alone and without aids.
▪ Lift and transport the temperature control unit at the lifting eyes only with a crane or an industrial truck.
▪ The crane or industrial truck must have a lifting force equal to or greater than the weight of the
temperature control unit. See the data sheet for the weight of the temperature control unit.
→ From page 59, section
»Annex«
.
▪ If the leveling feet have been removed for shipping: Only lower the temperature control unit when all
leveling feet have been installed. → Page 23, section »Mounting/removing leveling feet« .
2.1.1.2 Temperature control unit without lifting eyes
▪
Do not lift and transport the temperature control unit alone and without aids.
▪ Lift and transport the temperature control unit only with an industrial truck.
▪
The industrial truck must have a lifting force equal to or greater than the weight of the temperature control
unit. See the data sheet for the weight of the temperature control unit. → From page 59, section
»Annex«
.
▪ If the leveling feet have been removed for shipping: Only lower the temperature control unit when all
leveling feet have been installed. → Page 23, section »Mounting/removing leveling feet« .
2.1.2 Mounting/removing leveling feet
Only valid if the leveling feet have been removed for shipping.
The temperature control unit is not secured against slipping and/or lowering
DEATH OR SERIOUS INJURY DUE TO CRUSHING

Secure the temperature control unit against slipping and/or lowering before the leveling feet
are mounted.

Do not stand or lie under the temperature control unit for mounting.
The leveling feet were removed for shipping the temperature control unit. Before placing / posi-
tioning the temperature control unit all leveling feet must be mounted. If the temperature control
unit is re-shipped: Remove all leveling feet before packaging.
▪ The leveling feet can only be mounted while the temperature control unit is lifted.
▪ Secure the temperature control unit against slipping and/or lowering.
▪ Do not stand or lie under the temperature control unit while mounting the leveling feet.
▪ Do not lower the temperature control unit until all leveling feet have been mounted.
Example: Supporting
points for forklift arms
for free-standing
models from a certain
overall size. For the
exact position please
refer to the wiring
diagram in the annex.
Example: mounting
the leveling feet