Shutting down
Chapter 8
OPERATION MANUAL
V2.3.0en/22.04.20//17.12
Heat Transfer Station eo
79
Transport using the lugs, if fitted, on the top of the temperature control unit. Do not transport the
temperature control unit alone and without aids.
▪
Always use the original packaging for transport.
▪
Always transport the temperature control unit upright on a pallet!
▪
Protect attachments from damage during transport!
▪
During transport, place the temperature control unit on squared timber to protect the cas-
tors/feet.
▪
Secure with tensioning belts/lashing straps rated for the weight concerned.
▪
Additionally secure (depending on model) with plastic film, cardboard and straps.
8.7
Disposal
Improper disposal
ENVIRONMENTAL DAMAGE
Spilled/leaked thermofluid must be discarded immediately and correctly. Follow the instruc-
tions for the disposal of thermofluid and material on page 15 in section
.
To avoid environmental damage, have “disused” temperature control units disposed of exclu-
sively by approved waste management companies (e.g. refrigeration and air conditioning com-
panies).
Huber temperature control units and Huber accessories are made of high quality, recyclable materi-
als. For example: Stainless steel 1.4301 / 1.4401 (V2A), copper, nickel, FKM, Perbunan, NBR, ceram-
ic, carbon, Al-Oxid, red brass, brass, nickel-plated brass and silver solder. Proper recycling of the
temperature control unit and accessories can actively help reduce CO
2
emissions in the production
of these materials. Follow the laws and regulations of your jurisdiction when disposing material.
Pallet with squared
timber for free-
standing units
