Huber HTS 15 EO, Operation Manual

Page: 33 / 82

Function description
Chapter 3 OPERATION MANUAL
V2.3.0en/22.04.20//17.12
Heat Transfer Station eo
33
3.4 “Pilot ONE®” controller
The figure showing »“Pilot ONE”« can be found on page 6.
The basic version of “Pilot ONE” (Basic) can be upgraded in three stages (from “Basic” to “Exclusive”,
from “Exclusive” to “Professional”, and from “Professional” to “Explore”).
3.4.1 Functional overview of “Pilot ONE®”
You can verify, and optionally upgrade, the delivery version of your temperature control unit using
Pilot ONE, category “E-grade”.
Temperature control units / E-grade
E-grade
Basic
E-grade
Exclusive
E-grade
Profes-
sional
Brewing thermostats – X O
Unistat temperature control units – – X
UniCAL – – X
Other temperature control units X O O
E-grade “Explore” (only for “Unistat”-series temperature control units)
The E-grade includes E-grade “Professional” functionalities.
In addition it includes:
– Sensor calibration for return sensor
– Return temperature display
– Display of performance (estimated or calculated from volume flow)
– Display mode “Explore” instead of “numerically large”
– PB commands correspond to DV-E-grade, except: Temperatures only
in 0.01 °C and volume flows only in 0.1 l/min.
– – O
E-grade “DV-E-grade”
– All interface commands are enabled.
– Temperatures in 0.001 C, volume flows in 0.001 l/min possible (cf. E-
grade Explore)
Note: Only the interface commands are enabled, not the correspond-
ing menu items in Pilot ONE!
O O O
E-grade “OPC-UA”
– OPC-UA interface via Ethernet.
This E-grade additionally includes DV-E-grade functionalities.
O O O
X = Standard equipment, O = optional, – = not possible
Function
E-grade
Basic
E-grade
Exclusive
E-grade
Professi -
onal
Temperature control
Controller parameterization: predefined 1 / TAC 2 X/– –/X –/X
Find parameters: Fast Identification / With Preliminary Test / Estimate
Control Parameters
–/–/X X/X/– X/X/–
Sensor calibration for control sensor 3 : x -point 2 5 5
Monitoring: Low level and overtemperature 4 X X X
Adjustable alarm thresholds X X X
VPC 1 (Variable Pressure Control) X X X
1 TAC function available as a 30 day evaluation version.
2
True Adaptive Control.
3 Internal Pt100 and External Pt100.
4 For temperature control units with integrated overtemperature protection.
Overview of the
E-grade variants
Overview of
E-grade functions