Service/maintenance
OPERATION MANUAL
Chapter 7
CC®-Immersion circulator
V2.4.0en/08.12.20//17.12
68
Exposed plug contacts
DAMAGE CAUSED BY FLUID INGRESS
Protect unused plug contacts with the protective caps supplied.
Clean surfaces only with a damp cloth.
A standard stainless steel cleaning agent is suitable for cleaning the stainless steel surfaces. Carefully
clean painted surfaces (damp only) using a solution of sensitive-fabrics detergent. Follow the in-
structions on page 15, section
»Proper disposal of resources and consumables«
for the disposal of
cleaning agents and material.
7.7
Plug contacts
Exposed plug contacts
DAMAGE CAUSED BY FLUID INGRESS
Protect unused plug contacts with the protective caps supplied.
Clean surfaces only with a damp cloth.
Protective caps are supplied for all plug contacts. Make sure that any plug contacts not required are
protective with the caps.
7.8
Decontamination/repairs
Returning a not decontaminated temperature control unit for repair
PHYSICAL INJURY AND PROPERTY DAMAGE CAUSED BY HAZARDOUS MATERIALS IN OR ON THE
TEMPERATURE CONTROL UNIT
Carry out appropriate decontamination.
The decontamination process depends on the type and quantity of the materials used.
Consult the relevant safety data sheet.
You will find a prepared return receipt at www.huber-online.com.
As the responsible body you are responsible for carrying out decontamination
before
third-party
personnel come into contact with the temperature control unit / accessory. Decontamination must
be carried out
before
the temperature control unit / accessory is returned for repair or inspection.
Attach a clearly visible written notice stating that the temperature control unit / accessory has been
decontaminated.
To simplify the process, we have prepared a form for you. This is available for download at
www.huber-online.com.
