"Waveform Comparison" Interface
Left:
基本参数：
"Basic Parameters"
脉冲设置：
"Pulse Settings"
速度设置：
"Speed Settings"
电缆测速：
"Cable Speed"
波形处理：
"Waveform Processing"
时间设置：
"Time Setting"
返回：
"Exit"
Middle:
波形调出：
"Waveform Recall"
波形对比：
"Waveform Comparison"
波形存储：
"Waveform Storage"
波形删除：
"Waveform Delete"
波形打印：
"Waveform Print"
返回：
exit
确认：
OK
Right:
采样方式：
Sampling mode
采样频率
: Sampling frequency
电波速度
:Electrical wave
滤波方式
: Filter mode
移动选择
Moves selection
Bottom:
设置
:Settings
起点
: Start Point
采样
: Sampling
工作电压
:Working voltage
"Waveform Storage": The instrument can store 60 waveforms, and each waveform
occupies 64K bytes. Storage uses sampling time for file name. Press "Waveform
Storage" key and select the location to be stored with up and down keys on the lower
row, and press "OK" to store. If there is a file in the original place, then it will
overwrite the original one.(When you store repeated pulse waveform, then it will store
two waveform at the same time, so the space will be occupied by two files)
"Waveform Delete": When waveform stored do not need reservation, or storage space
is full, you can delete waveform files stored. Select the file needed to be delete with
up and down keys on the lower row, and press "OK" to delete.
