IV. Instructions
Panel Layout Drawing
From left to right:
电缆故障定点仪：
cable fault location instrument
LCD
显示器：
LCD screen
触发：
Trigger
工作：
Work
起停：
Start-stop
设置：
Settings
1. Parameter settings
You can adjust display brightness of the LCD, and select the LCD backlight
switch by selecting mode of location instrument or path instrument. After pressing
"Settings" key to enter setting interface when menu bar appears, select parameters
needed to be adjusted using arrow keys. Change the value of the parameters using left
and right arrow keys: Values of LCD brightness is between 0~100%. You can select
"on" or "off" for backlight. You can select "L"(Location) or "P"(path) for function.
Once set up, press "Start-Stop" key to return to sampling interface.
