transmission of multiple pulses, typically 50 microseconds to 200 microseconds and a
maximum of 255 microseconds. It can be appropriately modified depending on the
cable length. "Interval" refers to time interval between multiple pulses of an integer
multiple of 10 microseconds, typically set to 2-5. The longer the cable length is, the
larger this value is. "Width" refers to width of low-voltage pulse transmitted, typically
long distances between width of 0.2 microseconds to 0.5 microseconds. Shorter cable
use wide pulse, generally between 1 microsecond and 2 microseconds.
Pulse Settings Interface
Left:
基本参数：
"Basic Parameters"
脉冲设置：
"Pulse Settings"
速度设置：
"Speed Settings"
电缆测速：
"Cable Speed"
波形处理：
"Waveform Processing"
时间设置：
"Time Setting"
返回：
"Exit"
Middle:
延时：
Delay
间隔：
Interval
脉宽
: Width
返回：
exit
确认：
OK
Right:
采样方式：
Sampling mode
采样频率
: Sampling frequency
