Bottom:
设置
:Settings
起点
: Start Point
采样
: Sampling
工作电压
:Working voltage
Sub-menu of "Settings" menu will appear on the left of the screen, which are
"Basic Parameters", "Pulse Settings", "Speed Settings", "Cable Speed", "Waveform
Processing", "Time Setting" and "Exit", then press different keys respectively to enter
sub-menu.
"Basic Parameters": Press "Basic Parameters" key and it appears as shown in the
display. Press "Sampling Frequency", "Picture of Proportion", "Communication Rate"
according to need, and you can enter corresponding parameter sampling frequency of
120M, 60M, 30M three-gear on the numeric keypad, and other values are illegal.
Ratio of the whole picture is the compression ratio of the picture area, the value of
which can be entered between 1 and 114. Communication speed is to set the baud rate
between the cable tester and host communication.
①
=1200
②
=2400
③
=4800
④
=9600
⑤
=19200
⑥
=38400
⑦
=76800
⑧
=115000
