manualshive.com logo in svg

Huawei TaiShan 200 2280, Maintenance And Service Manual

Introducing the Huawei TaiShan 200 2280, a cutting-edge product designed to optimize your browsing experience. With its durable construction and advanced features, our Maintenance And Service Manual is now available for easy download. Enhance the longevity of your device by accessing this free manual today, exclusively from manualshive.com.

Share
Download
background image

8

 Common Operations

8.1 Querying the Management Network Port IP Address
8.2 Logging In to the iBMC WebUI
8.3 Logging In to the iBMC CLI
8.4 Logging In to the Remote Virtual Console
8.5 Logging In to the Server over a Serial Port Using PuTTY
8.6 Logging In to the Server over a Network Port Using PuTTY
8.7 Querying the Processor Model of a Server

8.1 Querying the Management Network Port IP

Address

Methods

You can obtain the IP address using any of the following methods:

●

Obtain the default IP address.

●

Use the iBMC WebUI.

●

Use the BIOS. For details, see this topic.

●

Log in to the iBMC CLI through the serial port, and run the ipmcget -d ipinfo

to query the IP address of the management network port. For details, see

TaiShan Rack Server iBMC User Guide

.

Default IP Address

The default IP address of the iBMC management network port is 192.168.2.100.

Procedure

Step 1 Connect a USB mouse and keyboard.

TaiShan 200 Server

Maintenance and Service Guide (Model 2280)

8 Common Operations

Issue 04 (2020-01-16)

Copyright © Huawei Technologies Co., Ltd.

167

Summary of Contents for TaiShan 200 2280


















































































































































































































Reviews:

No comments

Related manuals for TaiShan 200 2280

D-Link DP-300+ User Manual preview
DP-300+
Brand: D-Link Pages: 38
D-Link Epress EtherNetwork DP-301P+ Datasheet preview
Epress EtherNetwork DP-301P+
Brand: D-Link Pages: 2
Kathrein EXIP 4124 Quick Start Quide preview
EXIP 4124
Brand: Kathrein Pages: 16
Sun Oracle Sun Blade T6340 Installation And Administration Manual preview
Sun Blade T6340
Brand: Sun Oracle Pages: 82
Vecow ECS-9210 User Manual preview
ECS-9210
Brand: Vecow Pages: 122
NTI ENVIROMUX-MINI Installation And Operation Manual preview
ENVIROMUX-MINI
Brand: NTI Pages: 35
Axel AX3000/M85 Installation Manual preview
AX3000/M85
Brand: Axel Pages: 28
Thecus N2520 series User Manual preview
N2520 series
Brand: Thecus Pages: 130
Video Server 4 Ch Video Sever User Manual preview
4 Ch Video Sever
Brand: Video Server Pages: 34
HP ProLiant DL100 G2 DPSS Administration Manual preview
ProLiant DL100 G2 DPSS
Brand: HP Pages: 155
HP NetStorage 6000 User Manual preview
NetStorage 6000
Brand: HP Pages: 192
HP ProLiant DL100 G2 DPSS Installation Manual preview
ProLiant DL100 G2 DPSS
Brand: HP Pages: 44
Viavi G4-20G-010-192T Manual preview
G4-20G-010-192T
Brand: Viavi Pages: 12
Multitech TalkAnytime TA2410 User Manual preview
TalkAnytime TA2410
Brand: Multitech Pages: 235
Tektronix 5 Series Service Manual preview
5 Series
Brand: Tektronix Pages: 50
Celestix E6600 Installation Manual preview
E6600
Brand: Celestix Pages: 68
Supero SC819 Series User Manual preview
SC819 Series
Brand: Supero Pages: 80
Kantech INTEVO-ADV-3TB Quick Setup Manual preview
INTEVO-ADV-3TB
Brand: Kantech Pages: 114

Brands by name

Popular brands

Load more brands