Huawei TaiShan 200 2280 Maintenance And Service Manual Download Page 64

Page: 64 / 209

NVMe SSD Adapter Signal Cabling

Figure 3-17 NVMe SSD adapter signal cabling

Table 3-17 NVMe SSD adapter signal cabling

No.

Connectors and Cable

Part No.

Slimline cable for connecting PORT 1A/PORT 1B/

PORT 1C (J17/J18/J19) of the front drive backplane

to NVMe SSD adapter 1

04052103-00

Slimline cable for connecting PORT 2C (J31) of the

front drive backplane to PORT C of NVMe SSD

adapter 2

04052104-00

Slimline cable for connecting PORT 2A/PORT 2B

(J21/J32) of the front drive backplane to NVMe SSD

adapter 2

● Connect cables according to port labels on cables and silkscreens on the NVMe SSD

adapters and drive backplane. For example, connect the cable labeled PORT A to PORT

A of the NVMe SSD adapter and PORT A of the drive backplane.

● When connecting cables, connect Slimline cables to PORT 2A, PORT 2B, and PORT 2C,

and then connect Slimline cables to PORT 1A, PORT 1B, and PORT 1C.

● When connecting Slimline cables, connect the shorter cables, and then connect the

longer ones.

● To facilitate operations, remove the backplane before removing the power cables.

TaiShan 200 Server

Maintenance and Service Guide (Model 2280)

3 Internal Cabling

Issue 04 (2020-01-16)

Summary of Contents for TaiShan 200 2280


















































































































































































































Search results

Summary of Contents for TaiShan 200 2280

Reviews:

Related manuals for TaiShan 200 2280

Brands by name

Popular brands

Huawei TaiShan 200 2280, Maintenance And Service Manual

Search results

Summary of Contents for TaiShan 200 2280

Reviews:

Related manuals for TaiShan 200 2280

Brands by name

Popular brands