Huawei TaiShan 200 2280 Maintenance And Service Manual Download Page 193

Page: 193 / 209

●

Click Yes to open the IRC.

●

Click No to return to the login interface.

●

Click Import CA to import the CA certificate (*.cer, *.crt, or *.pem). After the

CA certificate is imported, the security risk dialog box will no longer be

displayed.

The IRC of the server is displayed, as shown in

Figure 8-22

Figure 8-22 IRC of the server

----End

8.5 Logging In to the Server over a Serial Port Using

PuTTY

Use PuTTY to log in to the server over a serial port in any of the following

scenarios:
●

The server is configured for the first time at a site.

●

A remote connection to the server cannot be established.

● Visit the chiark website and download the PuTTY software from the homepage.
● PuTTY of an earlier version may cause server login failures. You are advised to use

PuTTY of the latest version.

TaiShan 200 Server

Maintenance and Service Guide (Model 2280)

8 Common Operations

Issue 04 (2020-01-16)

186

Summary of Contents for TaiShan 200 2280


















































































































































































































Search results

Summary of Contents for TaiShan 200 2280

Reviews:

Related manuals for TaiShan 200 2280

Brands by name

Popular brands

Huawei TaiShan 200 2280, Maintenance And Service Manual

Search results

Summary of Contents for TaiShan 200 2280

Reviews:

Related manuals for TaiShan 200 2280

Brands by name

Popular brands