Huawei TaiShan 200 2280 Maintenance And Service Manual Download Page 4

Page: 4 / 209

Symbol

Description

Supplements the important information in the main text.
NOTE is used to address information not related to personal

injury, equipment damage, and environment deterioration.

Change History

Issue

Date

Description

2020-01-16

● Added information about how to

configure the server with Kunpeng

920 5220 or 3210 processors.

● Added information about iBMC V500

and later versions.

2019-12-17

Added the server with 24 x 2.5" SAS/

SATA pass-through drives.

2019-11-14

● Changed the product name.
● Added the FlexIO card with four 25GE

optical ports.

2019-07-01

This issue is the first official release.

TaiShan 200 Server

Maintenance and Service Guide (Model 2280)

About This Document

Issue 04 (2020-01-16)

iii

Summary of Contents for TaiShan 200 2280


















































































































































































































Search results

Summary of Contents for TaiShan 200 2280

Reviews:

Huawei TaiShan 200 2280, Maintenance And Service Manual, Page: 4 / 209

Search results

Summary of Contents for TaiShan 200 2280

Reviews: