Huawei TaiShan 200 2280 Maintenance And Service Manual Download Page 88

Page: 88 / 209

Figure 5-7 Installing an adjustable guide rail

2. Plug the second square holes at the front and rear of the guide rail using the

plugs included to secure the guide rail. See (2) in

Figure 5-7

3. (Optional) Install an M6 screw in the square hole underneath at the rear of

the guide rail and secure it. See (3) in

Figure 5-7

While screws are not necessary for the installation of adjustable guide rails, M6 screws

at the rear end of the server will make it more shockproof and secure.

4. Install the other guide rail in the same way.

Step 2 Install the server.

1. Lift the server. This task requires at least two people.
2. Place the server on the guide rails and slide it into the cabinet. See (1) in

Figure 5-8

TaiShan 200 Server

Maintenance and Service Guide (Model 2280)

5 Removal and Installation

Issue 04 (2020-01-16)

Summary of Contents for TaiShan 200 2280


















































































































































































































Search results

Summary of Contents for TaiShan 200 2280

Reviews:

Related manuals for TaiShan 200 2280

Brands by name

Popular brands

Huawei TaiShan 200 2280, Maintenance And Service Manual

Search results

Summary of Contents for TaiShan 200 2280

Reviews:

Related manuals for TaiShan 200 2280

Brands by name

Popular brands