5.4.2 Binding an MA to a VLAN
Binding an MA to a VLAN is a prerequisite for configuring the one-way frame delay
measurement in the VLAN.
Context
Do as follows on the devices configured with MEPs:
Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
cfm version
{
draft7
|
standard
}
The 802.1ag version is set to IEEE Standard 802.1ag-2007.
NOTE
IEEE 802.1ag has two versions: IEEE 802.1ag Draft 7 and IEEE Standard 802.1ag-2007. Y.1731 can be
used only on the device complying with IEEE Standard 802.1ag-2007. Therefore, run the cfm version
command to set the 802.1ag version to IEEE Standard 802.1ag-2007 before configuring Y.1731.
CAUTION
After the version is changed, all CFM configurations are deleted; therefore, use the cfm version
command with caution.
Step 3
Run:
cfm md
md-name
The MD view is displayed.
Step 4
Run:
ma
ma-name
The MA view is displayed.
Step 5
Run:
map
vlan
vlan-id
The MA is bound to a VLAN.
----End
5.4.3 (Optional) Setting an Alarm Threshold for the Two-way Frame
Delay Measurement
You can set an alarm threshold for the two-way frame delay measurement in each MA. When
the two-way delay exceeds the alarm threshold, an alarm is generated.
Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
5 ITU-T Recommendation Y.1731 Configuration
Issue 01 (2011-10-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
269