4.8.11 (Optional) Creating a VLAN
Through the association between a VLAN and default MDs, all interfaces of the specified VLAN
can generate MIPs based on default MDs.
Context
Do as follows on each device:
Procedure
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
cfm default md
[
level
level
]
The default MD is created and the default MD view is displayed.
Step 3
Run:
vlan
{
vlan-id1
[
to
vlan-id2
] }&<1-10>
The specified VLAN is created.
----End
4.8.12 Checking the Configuration
Prerequisite
The configurations of basic functions of Ethernet CFM are complete.
Procedure
l
Run the
display cfm md
[
md-name
] command to check the configuration of an MD.
l
Run the
display cfm ma
[
md
md-name
[
ma
ma-name
] ] command to check detailed
information about an MA.
l
Run the
display cfm mep
[
md
md-name
[
ma
ma-name
[
mep-id
mep-id
] ] ] command
to check detailed information about a MEP.
l
Run the
display cfm remote-mep
md
md-name
ma
ma-name
[
mep-id
mep-id
] or
display
cfm remote-mep
[
md
md-name
[
ma
ma-name
] ] [
cfm-state
{
up
|
down
|
disable
} ]
command to check detailed information about an RMEP.
l
Run the
display mip create-type
[
interface
interface-type
interface-number
] command
to check the MIP creation rule.
l
Run the
display cfm mip
[
interface
interface-type
interface-number
|
level
level
]
command to check information about a MIP.
----End
Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
4 Ethernet OAM Configuration
Issue 01 (2011-10-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
184