5 User Management
Quidway NetEngine80
Configuration Guide - Basic Configurations
5-8
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2009-12-20)
Step 3
Run:
user privilege level
level
The priority of the user interface is set.
The priority of the user is set.
This process is to set the priority for a user who logs in through the console interface. A user
can only use the command of proper level corresponding to the user level.
----End
For more information about the command priority, see section 3.1.2 "Command Level" in
Chapter 3 "CLI Overview".
5.2.5 Configuring User Authentication
Three user authentication modes are available on the router:
z
AAA authentication: requires the user name and password.
z
Password authentication: needs no user name but a password. Otherwise, the user cannot
log in to the router through the console interface.
z
Non-authentication: requires the user name and password. No authentication is needed
when the user logs in to the router.
Configuring AAA Authentication
Do as follows on the router:
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
user-interface console 0
The console user interface view is displayed.
Step 3
Run:
authentication-mode aaa
The authentication mode is set to AAA.
Step 4
Run:
quit
Exit from the console user interface view.
Step 5
Run:
aaa
The AAA view is displayed.
Step 6
Run:
