Quidway NetEngine80
Configuration Guide - Basic Configurations
10 Router Maintenance
Issue 04 (2009-12-20)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10-9
The checking of the air filter based on the device temperature is configured.
By default, the checking of the air filter based on the device temperature is enabled.
----End
10.5.3 Configuring a Cleaning Cycle for the Air Filter
Do as follows on the router:
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
dustproof check-timer day
INTEGER
The cleaning cycle for the air filtered is configured.
The air filter is a component without memory. All the monitored information is saved on the MPU,
which may be inserted, removed, switched, or replaced during usage. Therefore, the monitoring cycle
may differ from the set cycle, but this does not affect the monitoring function.
----End
10.5.4 Remonitoring the Cleaning Cycle of the Air Filter
The system generates an alarm about cleaning the air filter. After ensuring that the air filter is
cleaned or does not need to be cleaned, you need to clear the alarm and remonitor the cleaning
cycle of the air filter.
Do as follows on the router:
Step 1
Run:
reset dustproof run-time
The alarm is cleared. The cleaning cycle of the air filter is monitored.
----End
10.5.5 Checking the Configuration
Run the following commands to check the previous configuration.
Action
Command
View the information about the
air filter.
display dustproof
<Quidway>
display dustproof
Clean Dustproof-Net cycle : 365(days)
Last clean date : 2009/02/07
