Quidway NetEngine80
Configuration Guide - Basic Configurations
9 Telnet and SSH
Issue 04 (2009-12-20)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9-31
sysname RouterB
#
user-interface vty 0 4
set authentication password simple 123456
#
return
undo shutdown
9.8.2 Example for Connecting the STelnet Client to the SSH
Server
Networking Requirements
As shown in
Figure 9-7
, after the STelnet service is enabled on the SSH server, the STelnet
client can log in to the SSH server through the password or RSA authentication.
Configure two login clients:
z
Configure Client001 with the password as huawei and adopt the password
authentication.
z
Configure Client002, adopt the RSA authentication and assign the public key RsaKey001
to Client002.
The user interface supports only SSH.
Figure 9-7
Networking diagram of connecting the STelnet client to the SSH server
STelnet Client
SSH Server
Configuration Roadmap
The configuration roadmap is as follows:
1.
Configure both Client001 and Client002 on the SSH server.
2.
Generate the local key pairs on the STelnet client and the SSH server respectively.
3.
Generate the RSA public key on SSH server and bind the RSA public key of SSH client
to Client002.
4.
Enable STelnet service on the SSH server.
5.
Users Client001 and Client002 log in to the SSH server through STelnet.
Data Preparation
To complete the configuration, you need the following data:
z
Name and the authentication mode of the SSH user
z
Password or the RSA public key of the SSH user
z
Name of the SSH server
