manualshive.com logo in svg

Huawei Quidway NetEngine80, Configuration Manual

Share
Download
Huawei Quidway NetEngine80 Configuration Manual Download Page 179

9 Telnet and SSH 

Quidway NetEngine80

Configuration Guide - Basic Configurations

 

9-18 

Huawei Proprietary and Confidential           

Copyright © Huawei Technologies Co., Ltd. 

Issue 04 (2009-12-20)

 

----End 

By default, the SSH2.0 server is compatible with the SSH1.X server. If the client of SSH1.3 
to SSH 1.99 should not be allowed to log in, you must run the 

undo ssh server 

compatible-ssh1x enable

 command to disable the earlier version-compatible function. After 

that, the SSH client that has the version number greater than 1.3 and smaller than 1.99, 
including 1.3 and 1.99 cannot log in to the router. 

 

z

 

Compared with SSH1.X, SSH2.0 extends the structure to support more authentication methods and 
key exchange methods. In addition, the service capability of SSH2.0 is improved to support 
functions such as SFTP. 

z

 

This product supports the SSH versions that range from 1.3 to 2.0, including 1.3 and 2.0. 

9.4.5 (Optional)Configuring the Number of the Port Monitored by 
the SSH Server 

Do as follows on the router that serves as an SSH server: 

Step 1

 

Run: 

system-view 

The system view is displayed. 

Step 2

 

Run: 

ssh server port 

port-number

 

The number of the port monitored by the SSH server is configured. 

----End 

 

If a new number of the monitored port is configured, the SSH server interrupts all the STelnet and SFTP 
connections and monitors the port of the new number. By default, the number of the port monitored by 
the SSH server is 22. 

9.4.6 (Optional) Enabling the Trap Function 

Do as follows on the login router: 

Step 1

 

Run: 

system-view 

The system view is displayed. 

Step 2

 

Run: 

snmp-agent trap enable ssh

 

The trap function is enabled. 

----End 

Summary of Contents for Quidway NetEngine80










































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands