Quidway NetEngine80
Configuration Guide - Basic Configurations
9 Telnet and SSH
Issue 04 (2009-12-20)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9-53
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
* Notice: *
* This is a private communication system. *
* Unauthorized access or use may lead to prosecution. *
***********************************************************
Note: The max number of VTY users is 10, and the current number
of VTY users on line is 2.
<Quidway>
# Connect the SFTP client to the SSH server in the RADIUS authentication.
<client>
system-view
[client]
sftp 10.164.39.222
Please input the username:
Trying 10.164.39.222 ...
Press CTRL+K to abort
Connected to 10.164.39.222 ...
Enter password:
sftp-client>
Step 7
Verify the configuration.
After the configuration, run the
display radius-server configuration
and
display ssh server
session
commands on the SSH server. You can view the configuration of the RADIUS server
on the SSH server. You can also view that the STelnet or SFTP client is connected to the SSH
server successfully in the RADIUS authentication.
# Display the configuration of the RADIUS server.
[Quidway-aaa]
display radius-server configuration
-------------------------------------------------------------------
Server-template-name : ssh
Protocol-version : standard
Traffic-unit : B
Shared-secret-key : huawei
Timeout-interval(in second) : 5
Primary-authentication-server : 10.164.16.49:1812:LoopBack-1
Primary-accounting-server : 0.0.0.0:0:LoopBack0
Secondary-authentication-server : 0.0.0.0:0:LoopBack0
Secondary-accounting-server : 0.0.0.0:0:LoopBack0
Retransmission : 3
Domain-included : YES
-------------------------------------------------------------------
# Display the connection of the SSH server.
[Quidway]
display ssh server session
Session 1:
Conn : VTY 0
Version : 2.0
State : started
Username : [email protected]
Retry : 1
CTOS Cipher : aes128-cbc
