Quidway NetEngine80
Configuration Guide - Basic Configurations
4 Basic Configuration
Issue 04 (2009-12-20)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4-7
Step 1
Run:
super
[
level
]
User levels are switched.
Step 2
Follow the prompt and enter a password.
If the password input is correct, the user can switch to a higher level. If the user inputs a
password incorrectly for three times successively, the user remains the current login level and
the user view is returned.
----End
An accurate password must be entered when the user is switched from a lower level to a
higher level.
When configuring the switchover of user levels on the router, users can perform HWTACACS
Authentication. For detailed configurations, refer to the
Quidway NetEngine80
Core
RouterConfiguration Guide - Security
.
When the login user of lower levels is switched to the user of higher level through
super
, the system
automatically sends
trap
messages records the switchover in the log. When the switched level is lower
than that of the current level, the system only records the switchover in the log.
4.3.4 Locking User Interfaces
Do as follows on the router:
Step 1
Run:
lock
The user interface is locked.
Step 2
Follow the system prompt and input an unlock password, and then confirm.
<Quidway>
lock
Enter Password:
Confirm Password:
After configuration, the message
"
locked !
"
is displayed.
----End
When you leave the operation terminals for the moment, you can lock the user interface in
case unauthorized users operate the interface. You must enter the correct password to unlock
the user interface.
4.4 Displaying System Status Messages
Using the
display
commands to get the following status messages:
z
System configuration message
z
System working status message
