5 User Management
Quidway NetEngine80
Configuration Guide - Basic Configurations
5-26
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2009-12-20)
z
If the authentication mode is non-authentication or password authentication, the priority of the
user-interface determines the command level that the users can access.
z
If the authentication mode needs the username and the password, the priority of the user determines
the command level that the users can access.
5.6.6 Configuring User Priority
Refer to the
Quidway NetEngine80
Configuration Guide - Security.
5.6.7 Checking the Configuration
Run the following commands to check the previous configuration.
Action
Command
Check the user information.
display
users
[
all
]
Check information about local users.
display local-user
Check information about the access users.
display access-user
5.7 Configuring Local User Management
5.7.1 Establishing the Configuration Task
Applicable Environment
Create, maintain, and manage local users on local routers.
Pre-configuration Tasks
Before configuring local user management, complete the following tasks:
z
Powering on the router
z
Connecting the PC with the router properly
Data Preparation
To configure the local user management, you need the following data.
No.
Data
1
Username and password
2
Service type of the local user
3
FTP directory of the local user
4
The status of the local user
