Quidway NetEngine80
Configuration Guide - Basic Configurations
9 Telnet and SSH
Issue 04 (2009-12-20)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9-27
The file on the server is removed.
----End
After the SFTP client logs in to the SSH server, you can change the file name, delete the file, display the
file list, upload and download the file on the SFTP client side.
9.6.7 (Optional)Displaying the SFTP Client Command Help
Do as follows on the router:
Step 1
Run:
system-view
The system view is displayed.
Step 2
Run:
sftp
{
[
-a
source-address
]
host-ipv4
[
port
]
[
prefer_kex
{
dh_group1
|
dh_exchange_group
}
] [
prefer_ctos_cipher
{
des
|
3des
|
aes128
} ] [
prefer_stoc_cipher
{
des
|
3des
|
aes128
} ] [
prefer_ctos_hmac
{
sha1
|
sha1_96
|
md5
|
md5_96
} ]
[
prefer_stoc_hmac
{
sha1
|
sha1_96
|
md5
|
md5_96
} ] [
-vpn-instance
vpn-instance-name
]
You can log in to the SSH server through SFTP.
Step 3
Run:
help
[
all
|
command-name
]
The SFTP client command help is displayed.
----End
9.6.8 Checking the Configuration
Run the following commands to check the previous configuration.
Action
Command
Check the mapping between the SSH server and the
RSA public key on the SSH client side.
display ssh server-info
Check the session of the SSH client on the SSH server.
display ssh server session
Run the
display ssh server session
command. The information is displayed that the client
logs in from VTY4 through
sftp
service in
rsa
authentication mode.
[Quidway]
display ssh server session
Session 2:
Conn :
VTY 4
Version : 2.0
State : started
Username : client002
