Check Item
Normal
Abnormal
Optical fiber
a
l
The optical fiber connects the
interface of the FC HBA on the
AS to the FC switch.
l
The optical fiber connects the FC
service port of the VIS6000 to the
FC switch.
l
The optical fiber connects the FC
host port on the storage array to
the FC switch.
l
The optical fiber connects the
interface of the FC HBA on the
AS to the FC service port of the
VIS6000.
l
The optical fiber connects the FC
host port on the storage array to
the FC service port of the
VIS6000.
l
The optical fiber connects the
VIS6000 in the production center
to the VIS6000 in the disaster
recovery center.
NOTE
l
The VIS6000 uses multi-mode
optical modules and multi-mode
optical fibers.
l
Multi-mode optical modules cannot
be used with single-mode fibers.
l
When using an optical fiber to
establish a connection, note the
following: when one end of the
optical fiber is inserted into the
receiving interface, insert the other
end into the sending interface; or
when one end of the optical fiber is
inserted into the sending interface,
insert the other end into the
receiving end.
l
The optical fiber is not connected
in the correct networking mode.
l
The bayonet of the connector of
the optical fiber is not correctly
connected to the SFP optical
module.
OceanStor VIS6000 Series Virtual Intelligent Storage
System
Initial Configuration Guide
2 Check Before the Configuration
Issue 08 (2010-05-10)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2-5