NetCol8000-A013 In-room Air Cooled Smart Cooling
Product
User Manual (800 mm Width)
5 System Operation and Maintenance
Issue 05 (2019-12-20)
Copyright © Huawei Technologies Co., Ltd.
116
Context
Tools: Phillips screwdriver, diagonal pliers, cable tie.
Preparation: Power off the outdoor unit.
Procedure
Step 1
Turn off the indoor unit circuit breaker and circuit breaker in the power distribution cabinet.
If the outdoor unit does not take the electricity from indoor unit, turn off the circuit breaker
for the outdoor unit.
Step 2
Remove the top cover and left front panel using a Phillips screwdriver.
Step 3
Use a Phillips screwdriver to remove the five screws that secure the inductor box.
Figure 5-15
Remove the inductor box
Step 4
Use diagonal pliers to cut off the cable ties that bind the inductor cables, and remove the
interconnection terminals of the inductor from the control board. Remove the inductor box.
Take a photo before performing this step so that you know how to bind the cable ties and install the
terminals later.