Huawei MU509 Series At Command Interface Specification Download Page 173

Page: 173 / 227

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification

Status Control Commands

Issue 04 (2013-01-28)

Huawei Proprietary and Confidential

173

Status Control Commands

13.1 +CEER–Report Extended Error

13.1.1

Command Syntax

Command

Possible response(s)

+CEER

+CEER=?

13.1.2

Description

The SET command causes the MS to return one or more lines of information text
<report>, determined by the MT manufacturer, which should offer the user of the TA
an extended report of the reason for:



The failure in the last unsuccessful call setup (originating or answering) or in-call
modification;



The last call release;



The last unsuccessful GPRS attach or unsuccessful PDP context activation;



The last GPRS detach or PDP context deactivation.

Typically, the text will consist of a single line containing the cause information given by
GSM/UMTS network in textual format.

13.1.3

Defined Values

<report>: the total number of characters, including line terminators, in the information
text shall not exceed 2041 characters.

Note:

Text shall not contain the sequence 0<CR> or OK<CR>.

Summary of Contents for MU509 Series




































































































































































































































Search results

Summary of Contents for MU509 Series

Reviews:

Related manuals for MU509 Series

Brands by name

Popular brands

Huawei MU509 Series, At Command Interface Specification

Search results

Summary of Contents for MU509 Series

Reviews:

Related manuals for MU509 Series

Brands by name

Popular brands