Huawei MU509 Series At Command Interface Specification Download Page 69

Page: 69 / 227

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification

Short Message Service Commands

Issue 04 (2013-01-28)

Huawei Proprietary and Confidential

Table 6-1

SMS-DELIVER result code and acknowledgement summary

<mt> no class

or class 1

class 0 or message
waiting indication
group (discard)

class 2 or message
waiting
indication group
(store)

class 3

+CMTI

[+CMTI]

+CMTI

+CMT &
+CNMA

+CMT [& +CNMA]

+CMTI

+CMT & +CNMA

+CMTI

[+CMTI]

+CMTI

+CMT & +CNMA

Notes:



The class of message is given by the TP-DCS domain of the message. For details, see the
DCS parameter description of the “+CMGS” command.



+CMT & +CNMA means requiring TE to send a confirmation (+CNMA).

<bm>: for use of setting the cell broadcast information. It is reserved, not supported
currently. The default value is 0.

<ds>: for use of setting the message acknowledgement.

0: Do not send message acknowledgement to the TE (default value)

1: Do not store message acknowledgement in MS, route message acknowledgement
directly to TE.

When mode = 0 or 2, <ds> can

‟t be set to 1.

+CDS: <length><CR><LF><pdu>

2: If the message acknowledgement is stored in the MS, a storage position notification
will be sent to the TE via “+CDSI”.

+CDSI: <mem>,<index>

Note:

Because

“SR” is not supported, +CDSI can be sent out, but new message state report will be

lost.

<bfr>: for use of setting buffer processing after transition from <mode>=0 to
<mode>=1, 2. It is reserved, not supported currently.

0: If <mode>=1 or 2, the buffered unsolicited result codes will be sent to the TE at a
time (default value).

1: If <mode> = 1 or 2, the buffered unsolicited result codes will be emptied.

6.3.4

Examples

AT+CNMI=1,1,0,1,0.

Summary of Contents for MU509 Series




































































































































































































































Search results

Summary of Contents for MU509 Series

Reviews:

Related manuals for MU509 Series

Brands by name

Popular brands

Huawei MU509 Series, At Command Interface Specification

Search results

Summary of Contents for MU509 Series

Reviews:

Related manuals for MU509 Series

Brands by name

Popular brands