Huawei MU509 Series At Command Interface Specification Download Page 207

Page: 207 / 227

HUAWEI MU509 HSDPA LGA Module
AT Command Interface Specification

Internet Service Commands

Issue 04 (2013-01-28)

Huawei Proprietary and Confidential

207

15.10 ^IPCFL–Set IPSTACK Static Parameters

15.10.1

Command Syntax

Command

Possible response(s)

^IPCFL=<parameter_id>,<value>

In case of an MT-related error:

<CR><LF>ERROR<CR><LF>

^IPCFL?

<CR><LF>^IPCFL: <parameter_id>,<value>

[<CR><LF>^IPCFL:
<parameter_id>,<value>[

…]]<CR><LF>

^IPCFL=?

<CR><LF>^IPCFL: <parameter_id>,(list of
supported <value>s),

<CR><LF>^IPCFL: <parameter_id>,(list of
supported <value>s),
…

15.10.2

Description

This command is used to set some parameters of the IPSTACK. It only support set the
value items 5, 10 and 12 now. The other parameters are not supported in currently.

Note:

When used the query command. The response will not contain the unsupported items.

15.10.3

Defined Values

<parameter_id>: the item which the command will to set.

<value>: the value the command will set the item to.

parameter_id value range (Unit)

Description

–100 (unit: 0.1s,

default value: 10)

The value of the transparent transmission
timer

–1472(unit: 1Byte,

default value: 1024)

The transparent transmission length
Trigger

0,1(default value: 0)

The transparent transmission mode, see
the command ^IPENTRANS.

Summary of Contents for MU509 Series




































































































































































































































Search results

Summary of Contents for MU509 Series

Reviews:

Related manuals for MU509 Series

Brands by name

Popular brands

Huawei MU509 Series, At Command Interface Specification

Search results

Summary of Contents for MU509 Series

Reviews:

Related manuals for MU509 Series

Brands by name

Popular brands