Huawei Iris Hellas SUN2000 Series User Manual Download Page 94

Page: 94 / 123

8.4 Replacing a Fan

CA UTION

● Before replacing a fan, power off the inverter.
● When replacing a fan, use insulation tools and wear personal protective

devices.

NO TE

If the fan tray gets stuck when being pulled or pushed, slightly lift it.

Step 1

Remove the screw on the fan tray and save it. Pull out the fan tray until the fan

baffle plate aligns with the inverter chassis.

Figure 8-3

Pulling out fan tray (1)

Step 2

Remove the cable ties shared by the cables, unscrew the connectors, and

disconnect the cables.

Figure 8-4

Disconnecting cables

Step 3

Pull out the fan tray.

SUN2000-(175KTL-H0, 185KTL-INH0, 185KTL-H1

User Manual

8 Maintenance

Issue 05 (2020-08-30)

Summary of Contents for Iris Hellas SUN2000 Series




























































































































Search results

Summary of Contents for Iris Hellas SUN2000 Series

Reviews:

Related manuals for Iris Hellas SUN2000 Series

Brands by name

Popular brands

Huawei Iris Hellas SUN2000 Series, User Manual

Search results

Summary of Contents for Iris Hellas SUN2000 Series

Reviews:

Related manuals for Iris Hellas SUN2000 Series

Brands by name

Popular brands