Huawei Iris Hellas SUN2000 Series User Manual Download Page 21

Page: 21 / 123

Symbol

Name

Meaning

Burn warning

Do not touch a running inverter, as

the shell becomes hot during

operation.

Large current warning

Before powering on the inverter,

ensure that the inverter is grounded

because there is a large contact

current after the inverter is powered

on.

Delayed discharge

● High voltage exists after the

inverter is powered on. Only

qualified and trained electrical

technicians are allowed to

perform operations on the

inverter.

● Residual voltage exists after the

inverter is powered off. It takes

15 minutes for the inverter to

discharge to the safe voltage.

Refer to documentation

Reminds operators to refer to the

documents shipped with the inverter.

Grounding

Indicates the position for connecting

the protective earthing (PE) cable.

Operation warning

Do not remove the DC input

connector when the inverter is

running.

Fan operation warning

High voltage exists after the inverter

is powered on. Do not touch the

fans when the inverter is working.

Fan replacement warning Before replacing a fan, disconnect its

power connectors.

Inverter ESN label

Indicates the inverter serial number.

Weight label

The inverter needs to be carried by

four persons or using a pallet truck.

SUN2000-(175KTL-H0, 185KTL-INH0, 185KTL-H1

User Manual

2 Overview

Issue 05 (2020-08-30)

Summary of Contents for Iris Hellas SUN2000 Series




























































































































Search results

Summary of Contents for Iris Hellas SUN2000 Series

Reviews:

Related manuals for Iris Hellas SUN2000 Series

Brands by name

Popular brands

Huawei Iris Hellas SUN2000 Series, User Manual

Search results

Summary of Contents for Iris Hellas SUN2000 Series

Reviews:

Related manuals for Iris Hellas SUN2000 Series

Brands by name

Popular brands