IPC1601&2602&5602&5603
User Guide
7 Alarm Configuration
Issue 12 (2014-06-12)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
52
Step 5
Click
OK
.
The message "I/O Alarm Linkage Parameter Updated
！
" is displayed.
Step 6
Click
OK
.
The system automatically saves the settings.
----End
7.3 Setting Motion Detection Alarm Linkage Parameters
Description
On the
Motion Alarm
page, you can perform the following operations:
Enable the motion detection function.
Set the motion detection arming time.
Set the motion detection area.
Configure the motion alarm output channel.
When the alarm output function is enabled and the camera detects that an object moves
into the motion detection area within the schedule time, the camera generates an alarm
and triggers linkage alarm output (including alarm generation by the external alarm
device connected to the camera alarm output port and alarm information output).
Configure the PTZ linkage policy
Procedure
Step 1
Choose Alarm Configuration > Motion Alarm.
The
Motion Alarm
page is displayed, as shown in Figure 7-4. Table 7-2 describes the motion
detection alarm parameters.
Figure 7-4
Motion Alarm page
