Huawei IPC1601 User Manual Download Page 45

Page: 45 / 92

IPC1601&2602&5602&5603
User Guide

5 Device Configuration

Issue 12 (2014-06-12)

Huawei Proprietary and Confidential

Step 3

Press and hold the left mouse button, and drag on the preview image to cover the part to be
masked.



The maximum percentage of an image that can be masked depends on the device model. Read the
tip displayed on the page. A maximum of five areas can be masked.



You can right-click the image to clear masked areas.



You can click

Clear

to configure the masked areas again.

Step 4

Click

The message "Privacy Mask Updated" is displayed.

Step 5

Click

The system automatically saves the settings.

----End

5.10 Configuring the SD Card



Please use the normal SD card the regular manufacturers produced, or it will cause the
device restart.



Configuring the SD card will cause the data missing, please backup the data when
formating the SD card is used.

Procedure

Step 1

Choose

SD Card

The

SD Card Information

page is displayed, as shown in Figure 5-10.

Figure 5-10

SD card information page

If the disk status is not

when insert the SD card, please restart the IPC,

Set the parameters according to Table 5-6.

Summary of Contents for IPC1601





























































































Search results

Summary of Contents for IPC1601

Reviews:

Related manuals for IPC1601

Brands by name

Popular brands

Huawei IPC1601, User Manual

Search results

Summary of Contents for IPC1601

Reviews:

Related manuals for IPC1601

Brands by name

Popular brands