Huawei IPC1601 User Manual Download Page 4

Page: 4 / 92

IPC1601&2602&5602&5603
User Guide

About This Document

Issue 12 (2014-06-12)

Huawei Proprietary and Confidential

iii

Change History

Changes between document issues are cumulative. The latest document issue contains all the
changes made in earlier issues.

Updates in Issue 12 (2014-06-12)

This issue is the twelfth official release, compared to issue 11:

Modified

9.1 Configuring the Date and Time

Modified the Date&Time page and description.

Updates in Issue 11 (2014-02-25)

This issue is the eleventh official release, compared to issue 10:

Added

4.1 Login and Logout

Added notes of login and logout.

5.10 Configuring the SD Card

Added notes of configuring the SD card.

Modified

1 Safety Precautions

Modified the safety precautions.

4.3 Browsing Videos

Modified the browsing video notes.

5.4 Setting OSD Parameters

Modified the OSD page and description of OSD parameters.

5.8 Configuring the System Language

Modified the system language page and procedure.

5.9 Configuring the Privacy Mask Function

Modified the privacy masking page.

6.1 Setting Local Network Parameters

Modified the local network page and description of parameters.

Deleted

9.3.1 Configuring a Permission Group

Deleted the permission group parameters table.

Summary of Contents for IPC1601





























































































Search results

Summary of Contents for IPC1601

Reviews:

Related manuals for IPC1601

Brands by name

Popular brands

Huawei IPC1601, User Manual

Search results

Summary of Contents for IPC1601

Reviews:

Related manuals for IPC1601

Brands by name

Popular brands