Huawei FusionServer Pro G5500 Routine Maintenance Download

Page: 16 / 93

Page 16

1.2 Routine Inspection-Onsite Inspection

Inspection Item

Subitem

Description

Inspection

Result

Remarks

Health indicator on
the front panel

Status of the
system fault
indicator

If the indicator is steady red or blinking red,
the system is abnormal. If the indicator is
green, the system is operating properly.

□

Normal

□

Abnormal

Power
button/indicator on
the front panel

Status of the
system power
indicator

If the button or indicator is steady green,
the system is operating properly.

□

Normal

□

Abnormal

Drive indicator on the
front panel

Status of the
drive indicator

If the indicator  is steady green or blinking
green, the drive is operating  properly.  If
the indicator  is yellow  or off, the drive is
abnormal.

□

Normal

□

Abnormal

Indicator on the rear
panel

Status of the
AC power
indicator (on
the PSU)

If the indicator  is steady green, the system
is running properly.  If the indicator is off,
the system is not powered  on.

□

Normal

□

Abnormal

Fan module

Fan operating
status

If loud or abnormal noise is generated, the
fans are not operating properly. Otherwise,
the fans are operating properly.

□

Normal

□

Abnormal

Summary of Contents for FusionServer Pro G5500






























































































Search results

Summary of Contents for FusionServer Pro G5500

Reviews:

Related manuals for FusionServer Pro G5500

Brands by name

Popular brands

Huawei FusionServer Pro G5500, Routine Maintenance

Search results

Summary of Contents for FusionServer Pro G5500

Reviews:

Related manuals for FusionServer Pro G5500

Brands by name

Popular brands