Huawei FusionServer Pro G5500 Routine Maintenance Download

Page: 23 / 93

Page 23

Troubleshooting Flowchart

Procedure

Description

Find that the status or function of a
device is abnormal when using or
inspecting the device.

Collect all information to diagnose
and locate the fault.

Refer to documents or use tools to
analyze  the collected  information
and locate  the root cause of the fault
using fault location  methods.

Rectify the fault based on the
standard operation procedure.

Check the status or function of the
device to confirm that the fault is
rectified successfully.

Perform preventive measures to
prevent fault recurrence.

00 A fault is
detected.

01 Collect
information.

02 Diagnose and
locate the fault.

03 Develop and
implement the
fault rectification
method.

Is the fault

located?

04 Re-check
the fault.

05 Take preventative
measures.

Is the fault

rectified?

Finish

Yes

Summary of Contents for FusionServer Pro G5500






























































































Search results

Summary of Contents for FusionServer Pro G5500

Reviews:

Related manuals for FusionServer Pro G5500

Brands by name

Popular brands

Huawei FusionServer Pro G5500, Routine Maintenance

Search results

Summary of Contents for FusionServer Pro G5500

Reviews:

Related manuals for FusionServer Pro G5500

Brands by name

Popular brands