Huawei FusionServer Pro G5500 Routine Maintenance Download

Page: 50 / 93

Page 50

Indicators on a Compute Node

Identifier

Name

Color

Description

HLY

Health

indicator

Red and

green

• Off: The compute node is powered  off.
• Steady green: The compute node  hardware  is operating  properly.
• Blinking red (at 1 Hz): A major alarm has been generated  for the

compute node.

• Blinking red (at 5 Hz): A critical alarm has been generated for the

compute node, or the compute node is not securely installed.

Activity

indicator of the

drive

Green

• Off: The drive is faulty or not detected.
• Blinking green: Data is being read from or written into the drive, or

synchronized between drives.

• Steady green: The drive is inactive.

Fault indicator

of the drive

Yellow

• Off: The drive is operating properly or not detected in a RAID array.
• Blinking yellow: The drive is being located, or the RAID is being

reconstructed.

• Steady yellow: The drive is faulty or not detected.

NVMe SSD

activity

indicator

Green

•

Off: The SSD is faulty or not detected.

•

Blinking green: Data is being read from or written to the SSD, or

synchronized between SSDs.

•

Steady green: The SSD is not being accessed.

NVMe SSD

fault indicator

Yellow

•

Off: The SSD is operating properly

•

Blinking yellow (at 0.5 Hz): The SSD completes the hot swap process

and is ready to be removed.

•

Blinking yellow (at 2 Hz): The SSD is being located or hot-swapped.

•

Steady yellow: The SSD is faulty or not detected.

Summary of Contents for FusionServer Pro G5500






























































































Search results

Summary of Contents for FusionServer Pro G5500

Reviews:

Related manuals for FusionServer Pro G5500

Brands by name

Popular brands

Huawei FusionServer Pro G5500, Routine Maintenance

Search results

Summary of Contents for FusionServer Pro G5500

Reviews:

Related manuals for FusionServer Pro G5500

Brands by name

Popular brands