Huawei FusionServer Pro G5500 Routine Maintenance Download

Page: 66 / 93

Page 66



Install the CPU and heat sink

Take out the CPU protective cover.

Use light to check the CPU socket pins from different angle to see whether there are

twisted pins or foreign objects.

Align the two diagonal holes of the heat sink with the retaining clips on the CPU socket

and gently position the heat sink in place. Keep the assembly horizontal to avoid

damaging socket pins.

Install a heat sink. Tighten the two diagonal screws (corresponding to 1 on the heat sink

label) on the heat sink. See (1) in figure on the right. Then tighten the two middle screws

(corresponding to 2 on the heat sink label). See (2) in the figure on the right.

Installing a CPU in the G560 V5

Summary of Contents for FusionServer Pro G5500






























































































Search results

Summary of Contents for FusionServer Pro G5500

Reviews:

Related manuals for FusionServer Pro G5500

Brands by name

Popular brands

Huawei FusionServer Pro G5500, Routine Maintenance

Search results

Summary of Contents for FusionServer Pro G5500

Reviews:

Related manuals for FusionServer Pro G5500

Brands by name

Popular brands