Huawei eSpace 8850 User Manual Download

Page: 22 / 89

No.

Description

Earpiece

Speaker

Battery cover

2.3.4 Inserting/Removing the Battery from the Cordless Handset
(Sold Separately)

Use the battery provided with the cordless handset.

Figure 2-5

Inserting the battery into the cordless handset

Remove the battery cover by sliding the cover down.

Insert the battery provided in box into the battery compartment according to the preceding
figure.

Plug the battery connector into the receptacle in the battery compartment along the direction
indicated by the relevant arrow.

Replace the battery cover by sliding the cover up until it snaps in place.

NOTE

If the cordless handset is not to be used for a long time, remove the battery and store it carefully.

eSpace 8850 Video Phone
User Guide

2 Product Description

Issue 08 (2014-08-25)

Huawei Proprietary and Confidential

Summary of Contents for eSpace 8850


























































































Search results

Summary of Contents for eSpace 8850

Reviews:

Related manuals for eSpace 8850

Brands by name

Popular brands

Huawei eSpace 8850, User Manual

Search results

Summary of Contents for eSpace 8850

Reviews:

Related manuals for eSpace 8850

Brands by name

Popular brands