[~HUAWEI-ui-console0]
commit
Step 8
Exit the user serial port view.
[~HUAWEI-ui-console0]
quit
Step 9
Quit the system view.
[~HUAWEI]
quit
Step 10
Save the settings.
<HUAWEI>
save
Warning: The current configuration will be written to the device. Continue? [Y/N]:
Enter
Y
to save the configuration. The following information is displayed:
Now saving the current configuration to the slot 1 .
Info: Save the configuration successfully.
begin synchronize configuration to SMM ...
slot 1: upload configuration to SMM successfully.
<HUAWEI>
----End
l
Change the initial password for logging in to the converged switching plane over SSH.
Step 1
On the CLI of the converged switching plane, run the following command to go to the page
for changing a password:
<HUAWEI>
local-user change-password
The command output is as follows:
Please enter old password:
Step 2
Enter the old password.
The following information is displayed:
Please enter new password:
Step 3
Enter a new password.
The password is case-sensitive and must meet the following requirements:
l
Contain at least two types of the following characters:
–
Uppercase letters A to Z
–
Lowercase letters a to z
–
Digits 0 to 9
–
At least one of the following special characters: .`~!@#$%^&*()-_=+\|[{}];:'",<.>/
l
Cannot be the same as the user name or the user name in reverse order.
The following information is displayed:
Please confirm new password:
Step 4
Enter the new password again.
If the following information is displayed, the password is successfully changed:
Info: The password is changed successfully.
CX320 Switch Module
User Guide
4 Configuring the CX320
Issue 09 (2019-08-02)
Copyright © Huawei Technologies Co., Ltd.
66
