Huawei CX320 User Manual Download Page 3

Page: 3 / 113

About This Document

Purpose

This document describes the CX320 switch module (CX320) in terms of its features,
installation, removal, and configuration.

Intended Audience

This document is intended for:

Technical support engineers

Installation and commissioning engineers

Field maintenance engineers

System maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if
not avoided, could result in equipment damage, data
loss, performance deterioration, or unanticipated
results.
NOTICE is used to address practices not related to
personal injury.

CX320 Switch Module
User Guide

About This Document

Issue 09 (2019-08-02)

Summary of Contents for CX320


















































































































Search results

Summary of Contents for CX320

Reviews:

Brands by name

Popular brands

Huawei CX320, User Manual

Search results

Summary of Contents for CX320

Reviews:

Brands by name

Popular brands